SEARCH
MENU

Screw Inventory with Discounted Pricing

View our current stock of screws below! Search by size, OEM, or screw name and call or contact for promotional pricing today.

 

Get Screw Pricing 

ScrewOEMSizeDescription On Hand
ALPINE-S-50MM-4CC-M-17130ALPINE50mm50MM ALPINE FILM EXTRUDER FEED SCREW1.00
AMK-S-2.50-24LD-4C83C-PM-14835AMERICAN KUHNE2.50"2 1/2" OD X 24:1 L/D RATIO AMERICAN KUHNE EXTRUDER FEED SCREW, PINAPPLE MIXING SECTION, DRILLED FOR COOLING IN FEED SECTION ONLY. MANUFACTURED FROM ALLOY STEEL WITH COLMONOY 83 HARD-SURFACING ON THE MAIN FLIGHT AND CHROME PLATED.1.00
AR-S-15-NCN-CUS-12535ARBURG15mm15MM ARBURG FEED SCREW CUSTOM DESIGN FOR METAL MOLDING MANUFACTURED FROM NITRALLOY STEEL WITH COLMONOY 56 FLIGHTS AND NITRIDE ROOTS.3.00
AR-S-30-D2-11378ARBURG30mmARBURG 30MM FEED SCREW D2 TOOL STEEL, CONICAL FLIGHT DESIGN4.00
AP-S-22M-PX-900-10069ASIAN PACIFIC22mm22MM ASAIN PACIFIC FEED SCREW PX-900 TOOL STEEL1.00
AP-S-25M-NCN-14405ASIAN PACIFIC25mm25MM ASAIN PACIFIC FEED SCREW COL-56/NITRIDE1.00
AJ-S-32-VM8-VNT-14208AUTOJECTOR32mm32MM AUTOJECTOR 2 STAGE FEED SCREW,V-MAX-8 HIGH ABRASION- MANUFACTURED FROM PLASTI-CO'S SUPER HIGH ABRASION RESISTANT V-MAX-8 HEAT-TREATED TOOL STEEL.1.00
AJ-S-42-VM9-VNT-14135AUTOJECTOR42mm42MM AUTOJECTOR 2 STAGE FEED SCREW,MANUFACTURED FROM PLASTI-CO’S ULTRA-HIGH ABRASION RESISTANT V-MAX-9 HEAT-TREATED TOOL STEEL.1.00
BAT-S-18-NCN-CUS-12795BATTENFELD18mm18MM BATTENFIELD FEED SCREW COLMONY 56, NITRIDE, CUSTOM DESIGN1.00
BOY-S-24-M-VM8-14989BOY24mm24MM BOY MIXING FEED SCREW MANUFACTURED FROM PLASTI-CO V-MAX-8 SUPER HIGH ABRASION RESISTANT HEAT-TREATED TOOL STEEL. DESIGNED WITH P-3000 MIXING SECTION.1.00
CNV-S-110-C10-140OZ-4741CINCINNATI110mm110MM CINCINNATI VISTA SCREW CARBIDE ENCAPSULATE1.00
CNV-S-125-4CC-232-7432-BLK-ACINCINNATI125mm125MM CINCINNATI VISTA FEED SCREW, 232 OZ. SHOT SIZE, MANUFACTURED FROM ALLOY STEEL WITH COLMONOY 56 FLIGHTS AND CHROME PLATED ROOTS. GP DESIGN 3.0:1 COMP RATIO.1.00
CNV-S-140-C10-10063CINCINNATI140mm5/20/21 - SCREW IS NOT FINSIHED, NEEDS TO BE MACHINED AND COATED.//// 140MM CINCINNATI VISTA 362OZ. CARBIDE FEED SCREW1.00
CRS-S-26-VM8-16770CINCINNATI26mmMANUFACTURE FROM M2 TOOL STEEL HEAT-TREATED TO 54-56 Rc DRAW DOWN SHANK PER PRINT 167701.00
CRS-S-28M-C10-10196-NSYCINCINNATI28mm26MM ROBOTSHOT V-MAX-8 FEED SCREW: HIGH WEAR & VERY GOOD CORROSION. PLASTI-CO’S V-MAX-8 TOOL STEEL. HEAT-TREATED WITH POLISHED FLIGHT SIDES AND ROOTS. FITS S2000i-110 TON INJECTION UNITS1.00
CNF-S-32M-C10-5093CINCINNATI32mm32MM CINCINNATI FANUC FEED SCREW PCS-8881.00
CV35-CC-8461CINCINNATI35mm35MM CINCINNATI SCREW 5 OZ SHOT MANUFACTURED WITH COLMONOY 56 FLIGHTS AND CHROME PLATED ROOTS5.00
CV35-CN-8461CINCINNATI35mm35MM CINCINNATI SCREW 5 OZ SHOT MANUFACTURED FROM NITRALLOY STEEL WITH COLMONOY 56 FLIGHTS AND NITRIDE ROOTS.2.00
CRS-S-36M-VM8-14190CINCINNATI36mm36MM CINCINNATI ROBO SHOT FEED SCREW MANUFACTURED FROM PLASTI-CO'S SUPER HIGH ABRASION RESISTANT V-MAX-8 HEAT-TREATED TOOL STEEL. 3.2:1 COMP2.00
CV40-CN-5689CINCINNATI40mm40MM CINCINNATI SCREW 4140/COL/NIT 8OZ G.P4.00
CNV-S-40-NCN-8OZCINCINNATI40mm40MM CINCINNATI VISTA FEED SCREW COL-56/NITRIDE1.00
CNV-SC-42M-14688CINCINNATI42mm42MM CINCINNATI SPLIT COLLAR 4140 AND POLISH1.00
CNM-S-44M-C10-10734CINCINNATI44mm44MM CINCINNATI MAGNA CARBIDE FEED SCREW1.00
CNM-S-44M-C10-10734-NSYCINCINNATI44mm44MM CINCINNATI MAGNA FEED SCREW NOT SPRAYED YET2.00
CNV-S-45M-NCN-8399CINCINNATI45mm45MM CINCINNATI (11OZ.) G.P. SCREW NIT/COL/NIT1.00
CV45-CN-8399CINCINNATI45mm45MM CINCINNATI SCREW 4140/COL/NITRITED G.P2.00
CV50-CC-8400CINCINNATI50mm50MM CINCINNATI SCREW 4140/COL/CHROME G.P3.00
CRS-S-52-VM9-14024CINCINNATI52mm52MM ROBOSHOT V-MAX-9 FEED SCREW: VERY HIGH WEAR & VERY GOOD CORROSION. PLASTI-CO’S V-MAX-9 TOOL STEEL. HEAT-TREATED WITH POLISHED FLIGHT SIDES AND ROOTS.1.00
CNV-S-55-NCN-13541-20ZCINCINNATI55mm55MM CINCINNATI FEED SCREW, COL-56/NITRIDE, CUSTOM DESIGN FOR AGGRESSIVE PROCESSING OF POLYCARBONATE1.00
CV55-CN-6195CINCINNATI55mm55MM CINCINNATI SCREW 4140/COL/ NITRITED G.P, 20 OZ. SHOT SIZE.3.00
CV55-CC-6195CINCINNATI55mm55MM CINCINNATI SCREW 4140/COL/CHROME G.P, 20 OZ. SHOT SIZE.4.00
CNV-S-80-4CC-M-HAM-54-13466CINCINNATI80mm80MM CINCINNATI VISTA FEED SCREW WITH HIGHLY AGGRESSIVE P-3000 MIXING SECTION, MANUFACTURED FROM ALLOY STEEL WITH COLMONOY 56 FLIGHTS AND CHROME PLATED ROOTS. FITS 54 OZ. INJECTION UNIT.1.00
CV80-CC-6896CINCINNATI80mm80MM CINCINNATI G.P. SCREW MANUFACTURED WITH COLMONOY 56 FLIGHTS AND CHROME PLATED ROOTS - 54OZ SHOT2.00
CNV-S-50-4CC-M-9802CINCIS OZ50mm50MM CINCINNATI 15 OZ. MIXING SCREW COL-56/CHROM1.00
EN-S-120-C10-M-16681ENGEL120mmMANUFACTURE FROM 4150 STEEL UNDERCUT FOR CARBIDE COATING PRINT NO. 16681-1 PLASTICO TO SUPPLY THE STEEL. PLASTI-CO TO DO DRIVE END AND SCREW TIP THREAD.2.00
EN-S-150-4CC-M-12796ENGEL150mm150MM ENGEL FEED SCREW DESIGNED WITH P-3000 MIXING SECTION, MANUFACTURED FROM ALLOY STEEL WITH COLMONOY 56 HARD-SURFACING ON THE FLIGHTS AND CHROME PLATED ROOTS.1.00
EN-S-22-VM9-14962ENGEL22mm22MM ENGEL FEED SCREW MANUFACTRUED FROM PLASTI-CO'S ULTRA-HIGH ABRASION RESISTANT V-MAX-9 HEAT-TREATED TOOL STEEL.2.00
EN-S-45-NCN-LS-0736-370-40-02ENGEL45mm45MM ENGEL FEED SCREW MANUFACTURED FROM ALLOY AND NITRIDE, FOR LIQUID INJECTION MOLD1.00
EN-S-80-4CC-PVC-13757ENGEL80mm80MM ENGEL FEED SCREW WITH COLMONOY 56 / .002-.003 CHROME1.00
EN-S-90-VM8-M-17288ENGEL90mm90MM ENGEL, 2.8:1 COMPRESSION I V-MAX-8 WITH P-3000 MIXER FEED SCREW: HIGH WEAR & VERY GOOD CORROSION. PLASTI-CO’S V-MAX-8 TOOL STEEL. HEAT-TREATED WITH POLISHED FLIGHT SIDES AND ROOTS.1.00
EN-S-90-CPR-16306ENGEL90mm90MM ENGEL FEED SCREW “CPR-4140-COL56” ULTRA HIGH CORROSION & MODERATE WEAR: FULL ENCAPSULATION OF THE FLIGHT AND BARRING AREA WITH PLASTI-CO’S CPR CHROME PLATING REPLACEMENT APPLIED USING ULTRA HIGH VELOCITY THERMAL SPRAY TECHNOLOGY IN A LAYER OF .005” PER SIDE FOR TOTAL PROTECTION OF .010 TO .012” THEN DIAMOND POLISHED PROVIDING A SUPER 6-10 RMS MIRROR SURFACE FINISH. BASE STEEL PRE HEAT-TREATED 4140 ALLOY STEEL WITH COLMONOY 56 HARD-FACING ON THE FLIGHT TOPS FOR AN ADDED LAYER OF WEAR RESISTANCE.1.00
NB-S-1 3/4-4CCPR-BM-14039-NSYFEED SCREW ++S SCREW1.75"1 3/4" NEWBURY FEED SCREW ++++++++++PREPPED FOR CPR COATING +++++++++1.00
GE-S-.750-24LD-174N-BM-14902GRAHAM.75".750" OD X 24:1 L/D RATIO GRAHAM ENGINEERING EXTRUDER FEED SCREW, BARRIER FLIGHT TRANSITION SECTION AND SPIRAL MADDOX MIXING SECTION, MANUFACTURED FROM 17-4 PH STAINLESS STEEL & NITRITE1.00
GE-S-.750-24LD-174N-14900GRAHAM.75".750" OD X 24:1 L/D RATIO GRAHAM ENGINEERING EXTRUDER FEED SCREW, METERING MANUFACTURED FROM 17-4 PH STAINLESS STEEL WITH NITRITE & POLISH1.00
GE-S-.750-24LD-174N-14940GRAHAM.75".750" OD X 24:1 L/D RATIO GRAHAM ENGINEERING EXTRUDER FEED SCREW, METERING MANUFACTURED FROM 17-4 PH STAINLESS STEEL NITRIDED & POLISHED5.00
GE-S-.750-24LD-174N-BM-15697-SGRAHAM.75".750" OD X 24:1 L/D RATIO GRAHAM ENGINEERING EXTRUDER FEED SCREW, BARRIER FLIGHT TRANSITION SECTION AND SPIRAL MADDOX MIXING SECTION, MANUFACTURED FROM 17-4 PH STAINLESS STEEL & NITRITE1.00
GE-S-1.00-24LD-174N-BM-16099GRAHAM1.00"1.00" OD X 24:1 L/D RATIO GRAHAM ENGINEERING EXTRUDER FEED SCREW, BARRIER WITH SPIRAL MADDOX DESIGN MANUFACTURED FROM 17-4 PH STAINLESS STEEL WITH NITRITE & POLISH1.00
GE-S-1.00-24LD-4CC-BM-15271GRAHAM1.00"1.00 " OD X 24:1 L/D RATIO GRAHAM ENGINEERING EXTRUDER FEED SCREW, BARRIER WITH SPIRAL MADDOX MIXING SECTION, MANUFACTURED FROM ALLOY STEEL WITH COLMONOY 56 HARD-SURFACING ON THE MAIN FLIGHT AND CHROME PLATED.1.00
GE-S-1.00-24LD-4CC-BM-15335GRAHAM1.00"1.00 " OD X 24:1 L/D RATIO GRAHAM ENGINEERING EXTRUDER FEED SCREW, BARRIER WITH SPIRAL MADDOX MIXING SECTION, MANUFACTURED FROM ALLOY STEEL WITH COLMONOY 56 HARD-SURFACING ON THE MAIN FLIGHT AND CHROME PLATED.1.00
GE-S-1.00-24LD-174N-16335GRAHAM1.00"MANUFACTURE FROM 17-4 PH STAINLESS STEEL & NITRITE , POLISH AS TO PRINT # 16335 THIS IS FOR VERY IMPORTANT CUSTOMER. MUST MATCH PRINT PERFECT.1.00
GE-S-1.00-24LD-174N-SM-14931GRAHAM1.00"1.00" OD X 24:1 L/D RATIO GRAHAM ENGINEERING EXTRUDER FEED SCREW, SPIRAL MADDOX DESIGN MANUFACTURED FROM 17-4 PH STAINLESS STEEL WITH NITRITE & POLISH1.00
GE-S-1.00-24LD-4CC-BM-14965GRAHAM1.00"1.00 " OD X 24:1 L/D RATIO GRAHAM ENGINEERING EXTRUDER FEED SCREW, BARRIER WITH SPIRAL MADDOX MIXING SECTION, MANUFACTURED FROM ALLOY STEEL WITH COLMONOY 56 HARD-SURFACING ON THE MAIN FLIGHT AND CHROME PLATED.3.00
GE-S-1.00-24LD-4CC-BM-17307GRAHAM1.00"1.00 " OD X 24:1 L/D RATIO GRAHAM ENGINEERING EXTRUDER FEED SCREW, BARRIER WITH SPIRAL MADDOX MIXING SECTION, MANUFACTURED FROM ALLOY STEEL WITH COLMONOY 56 HARD-SURFACING ON THE MAIN FLIGHT AND CHROME PLATED.1.00
GE-S-1.00-24LD-174N-BM-14965GRAHAM1.00-24LD-174N00-24LD-174N"1.00" OD X 24:1 L/D RATIO GRAHAM ENGINEERING EXTRUDER FEED SCREW, BARRIER WITH SPIRAL MADDOX DESIGN MANUFACTURED FROM 17-4 PH STAINLESS STEEL WITH NITRITE & POLISH1.00
GE-S-1.25-24LD-174N-BM-16251GRAHAM1.25"1.25" OD X 24:1 L/D RATIO GRAHAM ENGINEERING EXTRUDER FEED SCREW, BARRIER FLIGHT TRANSITION SECTION AND SPIRAL MADDOX MIXING SECTION, MANUFACTURED FROM 17-4 PH STAINLESS STEEL & NITRITE1.00
GE-S-1.25-24LD-4CC-M-14877GRAHAM1.25"1 1/4" OD X 24:1 L/D RATIOGRAHAM ENGINEERING EXTRUDER FEED SCREW, SPIRAL MADDOX MIXING SECTION, MANUFACTURED FROM ALLOY STEEL WITH COLMONOY 56 HARD-SURFACING ON THE MAIN FLIGHT AND CHROME PLATED.1.00
GE-S-1.25-24LD-174N-BM-14897GRAHAM1.25"1 1/4" OD X 24:1 L/D RATIO GRAHAM ENGINEERING EXTRUDER FEED SCREW, BARRIER FLIGHT TRANSITION SECTION AND SPIRAL MADDOX MIXING SECTION, MANUFACTURED FROM 17-4 PH STAINLESS STEEL & NITRITE1.00
GE-S-1.25-24LD-174N-14890GRAHAM1.25"1 1/4" OD X 24:1 L/D RATIO GRAHAM ENGINEERING EXTRUDER FEED SCREW, METERING MANUFACTURED FROM 17-4 PH STAINLESS STEEL WITH NITRITE & POLISH1.00
GE-S-1.25-24LD-174N-14896GRAHAM1.25"1 1/4" OD X 24:1 L/D RATIO GRAHAM ENGINEERING EXTRUDER FEED SCREW, METERING MANUFACTURED FROM 17-4 PH STAINLESS STEEL WITH NITRITE & POLISH1.00
GE-S-1.25-24LD-174NP-15134GRAHAM1.25"1 1/4" OD X 24:1 L/D RATIO GRAHAM ENGINEERING EXTRUDER FEED SCREW, METERING MANUFACTURED FROM 17-4 PH STAINLESS STEEL WITH NITRITE & POLISH1.00
GE-S-1.25-24LD-174NP-BM-14906GRAHAM1.25"1 1/4" OD X 24:1 L/D RATIO GRAHAM ENGINEERING EXTRUDER FEED SCREW, BARRIER FLIGHT TRANSITION SECTION AND SPIRAL MADDOX MIXING SECTION, MANUFACTURED FROM 17-4 PH STAINLESS STEEL & NITRIDE & POLISH1.00
GE-S-1.50-30LD-4C83C-BM-14956GRAHAM1.50"1 1/2" OD X 30:1 L/D RATIO GRAHAM ENGINEERING SCREW, BARRIER MIXING SECTION,SPIRAL MADDOX DRILLED FOR COOLING IN FEED SECTION ONLY. MANUFACTURED FROM ALLOY STEEL WITH COLMONOY 83 HARD-SURFACING ON THE MAIN FLIGHT AND CHROME PLATED.1.00
GE-S-1.50-30LD-4C83C-BM-15043GRAHAM1.50"1 1/2" OD X 30:1 L/D RATIO GRAHAM ENGINEERING SCREW, BARRIER MIXING SECTION,SPIRAL MADDOX DRILLED FOR COOLING IN FEED SECTION ONLY. MANUFACTURED FROM ALLOY STEEL WITH COLMONOY 83 HARD-SURFACING ON THE MAIN FLIGHT AND CHROME PLATED.1.00
GE-S-1.50-30LD-4C83C-BM-15072GRAHAM1.50"1 1/2" OD X 30:1 L/D RATIO GRAHAM ENGINEERING SCREW, BARRIER MIXING SECTION,SPIRAL MADDOX DRILLED FOR COOLING IN FEED SECTION ONLY. MANUFACTURED FROM ALLOY STEEL WITH COLMONOY 83 HARD-SURFACING ON THE MAIN FLIGHT AND CHROME PLATED.1.00
GE-S-1.50-24LD-4CC-14885GRAHAM1.50"1 1/2" OD X 24:1 L/D RATIO GRAHAM ENGINEERING EXTRUDER FEED SCREW, MANUFACTURED FROM ALLOY STEEL WITH COLMONOY 56 HARD-SURFACING ON THE MAIN FLIGHT AND CHROME PLATED.1.00
GE-S-1.50-24LD-4CC-BM-15197GRAHAM1.50"1 1/2" OD X 24:1 L/D RATIO GRAHAM ENGINEERING SCREW, BARRIER MIXING SECTION,SPIRAL MADDOX DRILLED FOR COOLING IN FEED SECTION ONLY. MANUFACTURED FROM ALLOY STEEL WITH COLMONOY 56 HARD-SURFACING ON THE MAIN FLIGHT AND POLISH ROOTS.1.00
GE-S-1.75-24LD-4CC-15130GRAHAM1.75"1 3/4" OD X 24:1 L/D RATIO GRAHAM ENGINEERING EXTRUDER FEED SCREW, MANUFACTURED FROM ALLOY STEEL WITH COLMONOY 56 HARD-SURFACING ON THE MAIN FLIGHT AND CHROME PLATED.1.00
GE-S-2.50-24LD-4CC-BM-15270GRAHAM2.50"2 1/2" OD X 24:1 L/D RATIO GRAHAM ENGINEERING SCREW, BARRIER FLIGHT TRANSITION SECTION AND SPIRAL MADDOX MIXING SECTION, DRILLED FOR COOLING IN FEED SECTION ONLY. MANUFACTURED FROM ALLOY STEEL WITH COLMONOY 56 HARD-SURFACING ON THE MAIN FLIGHT AND CHROME PLATED.2.00
GE-S-2.50-30LD-4C83C-BM-15393GRAHAM2.50"2 1/2" OD X 30:1 L/D RATIO GRAHAM ENGINEERING SCREW, BARRIER MIXING SECTION,SPIRAL MADDOX DRILLED FOR COOLING IN FEED SECTION ONLY. MANUFACTURED FROM ALLOY STEEL WITH COLMONOY 83 HARD-SURFACING ON THE MAIN FLIGHT AND CHROME PLATED.1.00
GE-S-2.50-30LD-4C83C-BM-14926GRAHAM2.50"2 1/2" OD X 30:1 L/D RATIO GRAHAM ENGINEERING SCREW, BARRIER MIXING SECTION,SPIRAL MADDOX DRILLED FOR COOLING IN FEED SECTION ONLY. MANUFACTURED FROM ALLOY STEEL WITH COLMONOY 83 HARD-SURFACING ON THE MAIN FLIGHT AND CHROME PLATED.1.00
GE-S-2.50-30LD-4C83C-BM-14937GRAHAM2.50"2 1/2" OD X 30:1 L/D RATIO GRAHAM ENGINEERING SCREW, BARRIER MIXING SECTION,SPIRAL MADDOX DRILLED FOR COOLING IN FEED SECTION ONLY. MANUFACTURED FROM ALLOY STEEL WITH COLMONOY 83 HARD-SURFACING ON THE MAIN FLIGHT AND CHROME PLATED.1.00
GE-S-2.50-24LD-4C83C-BM-15348GRAHAM2.50"2 1/2" OD X 24:1 L/D RATIO GRAHAM ENGINEERING SCREW, BARRIER MIXING SECTION,SPIRAL MADDOX DRILLED FOR COOLING IN FEED SECTION ONLY. MANUFACTURED FROM ALLOY STEEL WITH COLMONOY 83 HARD-SURFACING ON THE MAIN FLIGHT AND CHROME PLATED.1.00
GE-S-2.50-24LD-4CC-BM-14923GRAHAM2.50"2 1/2" OD X 24:1 L/D RATIO GRAHAM ENGINEERING SCREW, BARRIER FLIGHT TRANSITION SECTION AND SPIRAL MADDOX MIXING SECTION, DRILLED FOR COOLING IN FEED SECTION ONLY. MANUFACTURED FROM ALLOY STEEL WITH COLMONOY 56 HARD-SURFACING ON THE MAIN FLIGHT AND CHROME PLATED.1.00
GE-S-2.50-24LD-4CC-BM-15138GRAHAM2.50"2 1/2" OD X 24:1 L/D RATIO GRAHAM ENGINEERING SCREW, BARRIER FLIGHT TRANSITION SECTION AND SPIRAL MADDOX MIXING SECTION, DRILLED FOR COOLING IN FEED SECTION ONLY. MANUFACTURED FROM ALLOY STEEL WITH COLMONOY 56 HARD-SURFACING ON THE MAIN FLIGHT AND CHROME PLATED.1.00
GE-S-25MM-24LD-174N-BM-15286GRAHAM25mm25MMWITH SPIRAL MADDOX DESIGN MANUFACTURED FROM 17-4 PH STAINLESS STEEL WITH NITRITE & POLISH1.00
GE-S-3.00-24LD-4CC-BM-15139GRAHAM3.00"3.00" OD X 24:1 L/D RATIO GRAHAM ENGINEERING SCREW, BARRIER FLIGHT TRANSITION SECTION AND SPIRAL MADDOX MIXING SECTION, DRILLED FOR COOLING IN FEED SECTION ONLY. MANUFACTURED FROM ALLOY STEEL WITH COLMONOY 56 HARD-SURFACING ON THE MAIN FLIGHT AND CHROME PLATED.1.00
GE-S-3.00-30LD-4CC-BM-15918GRAHAM3.00"3" OD X 30:1 L/D RATIO GRAHAM ENGINEERING SCREW, BARRIER MIXING SECTION,SPIRAL MADDOX DRILLED FOR COOLING IN FEED SECTION ONLY. MANUFACTURED FROM 4340 / COLMONOY NO. 56 / CHROME: PRE HEAT-TREATED 4340- ALLOY STEEL WITH COLMONOY NO. 56 HARD-SURFACING ON THE FLIGHT, CHROME PLATED FLIGHT SIDES & ROOTS.1.00
GE-S-3.50-24LD-4CC-BM-15208GRAHAM3.50"3 1/2" OD X 24:1 L/D RATIO GRAHAM ENGINEERING SCREW, BARRIER MIXING SECTION,SPIRAL MADDOX DRILLED FOR COOLING IN FEED SECTION ONLY. MANUFACTURED FROM ALLOY STEEL WITH COLMONOY 56 HARD-SURFACING ON THE MAIN FLIGHT AND CHROME PLATED.1.00
GE-S-3.50-30LD-4CC-BM-15844GRAHAM3.50"3 1/2" OD X 30:1 L/D RATIO GRAHAM ENGINEERING SCREW, BARRIER MIXING SECTION,SPIRAL MADDOX DRILLED FOR COOLING IN FEED SECTION ONLY. MANUFACTURED FROM ALLOY STEEL WITH COLMONOY 56 HARD-SURFACING ON THE MAIN FLIGHT AND CHROME PLATED.1.00
GE-S-3.50-24LD-4CC-BM-15140GRAHAM3.50"3 1/2" OD X 24:1 L/D RATIO GRAHAM ENGINEERING SCREW, BARRIER MIXING SECTION,SPIRAL MADDOX DRILLED FOR COOLING IN FEED SECTION ONLY. MANUFACTURED FROM ALLOY STEEL WITH COLMONOY 56 HARD-SURFACING ON THE MAIN FLIGHT AND CHROME PLATED.1.00
GE-S-65MM-24LD-4C83C-BM-15052GRAHAM65mm65MM OD X 24:1 L/D RATIO GRAHAM ENGINEERING SCREW, BARRIER MIXING SECTION,SPIRAL MADDOX DRILLED FOR COOLING IN FEED SECTION ONLY. MANUFACTURED FROM ALLOY STEEL WITH COLMONOY 83 HARD-SURFACING ON THE MAIN FLIGHT AND CHROME PLATED.5.00
GE-S-75MM-4CC-BM-15269GRAHAM75mm75MM OD X 28:1 L/D RATIO GRAHAM ENGINEERING EXTRUDER FEED SCREW, BARRIER WITH SPIRAL MADDOX MIXING SECTION, MANUFACTURED FROM ALLOY STEEL WITH COLMONOY 56 HARD-SURFACING ON THE MAIN FLIGHT AND CHROME PLATED.1.00
GE-S-90-30LD-4C83C-BMP-15045GRAHAM90mm90MM OD X 30:1 L/D RATIO GRAHAM ENGINEERING SCREW, BARRIER MIXING SECTION,SPIRAL MADDOX & PINAPPLE MIXER DRILLED FOR COOLING IN FEED SECTION ONLY. MANUFACTURED FROM ALLOY STEEL WITH COLMONOY 83 HARD-SURFACING ON THE MAIN FLIGHT AND CHROME PLATED.1.00
HA-S-90-4CDC-M-4500-14682HAITIAN90mm90MM HAITIAN FEED SCREW MANUFACTURED FROM ALLOY STEEL WITH COLMONOY 56 FLIGHTS AND DOUBLE CHROME PLATED ROOTS.CUSTOM P-3000 MIXER, FITS 4500 INJECTIN UNIT 2.8:1 COMPRESSION RATIO.1.00
HPM-S-6.0-4CC-M-24-12479HPM6.00"HPM 6.0" OD 24:1 L/D RATIO MIXING FEED SCREW MANUFACTURED FROM ALLOY STEEL WITH COLMONOY 56 FLIGHTS AND CHROME PLATED ROOTS. DESIGNED WITH PLASTI-CO'S P-3000 MIXING SECTION.1.00
HU-S-125M-C10-M-16682HUSKY125mmMFG FROM 4140 ALLOY STEEL AS TO PRINT # 166821.00
HU-S-55M-4CC-11656HUSKY55mm55MM HUSKY 24:1 L/D FEED SCREW COLMONOY/CHROME1.00
JSW-S-40M-C10-6327JSW40mm40MM JSW FEED SCREW WITH CARBIDE ENCAPSULATION1.00
JSW-S-40M-C10-NSY-6327JSW40mm40MM JSW FEED SCREW WITHOUT CARBIDE ENCAPSULATION1.00
JSW-S-72M-C10-10633 - ECJSW72mm72MM JSW FEED SCREW (ELECTRICAL) CARBIDE ENCAPSUALTED2.00
KM-S-50-VM9HC-ZERO-PC-15121KRAUSS MAFFEI50mm50MM KRAUSS MAFFEI FEED SCREW WITH CUSTOM PC FLIGHT PROFILE WITH HIGHLY POLISHED FLIGHT SIDES AND ROOTS, TREATED WITH THE 300 BELOW PROCESS MANUFACTURED FROM V-MAX-9HC VERY HIGH WEAR & HIGH CORROSION: MANUFACTURED FROM PLASTI-CO’S V-MAX-9HC TOOL STEEL OFFERING VERY HIGH WEAR, HIGH CORROSION RESISTANCE PROPERTIES A POWDER METAL PRODUCT USING HIGH LEVELS OF VANADIUM CARBIDE COMBINED WITH VERY HIGH LEVELS OF CHROMIUM. COMPARABLE TO OTHER HIGH VANADIUM POWDER METAL STEEL WITH THE V-MAX ENHANCEMENTS, HEAT-TREATED AND POLISHED FLIGHT SIDES AND ROOTS.1.00
KM-S-55-VM9HC-ZERO-PC-15122KRAUSS MAFFEI55mm55MM KRAUSS MAFFEI FEED SCREW WITH CUSTOM PC FLIGHT PROFILE WITH HIGHLY POLISHED FLIGHT SIDES AND ROOTS, TREATED WITH THE 300 BELOW PROCESS MANUFACTURED FROM V-MAX-9HC VERY HIGH WEAR & HIGH CORROSION: MANUFACTURED FROM PLASTI-CO’S V-MAX-9HC TOOL STEEL OFFERING VERY HIGH WEAR, HIGH CORROSION RESISTANCE PROPERTIES A POWDER METAL PRODUCT USING HIGH LEVELS OF VANADIUM CARBIDE COMBINED WITH VERY HIGH LEVELS OF CHROMIUM. COMPARABLE TO OTHER HIGH VANADIUM POWDER METAL STEEL WITH THE V-MAX ENHANCEMENTS, HEAT-TREATED AND POLISHED FLIGHT SIDES AND ROOTS.1.00
KM-S-TS-75M-NCN-12228KRAUSS MAFFEI75mm75MM KRAUSE-MAFFEI THERMOSET SCREW COL #56/NITRIDED2.00
KM-S-TS-80M-NCN-15047KRAUSS MAFFEI80mm80MM KRAUSE-MAFFEI THERMOSET SCREW COL #56/NITRIDED2.00
MIT-S-25-4CC-15507MITSUBISHI25mm25MM MITSUBISHI “4CC-83” 4140 / COLMONOY NO. 83 / CHROME: MANUFACTURED FROM PRE HEAT-TREATED 4140 SERIES ALLOY STEEL WITH COLMONOY NO. 83 HARD-SURFACING ON THE FLIGHT, CHROME PLATED FLIGHT SIDES & ROOTS.1.00
MIT-S-36M-VM9-11367MITSUBISHI36mm2.00
MIT-S-57-NCN-6140MITSUBISHI57mm57MM MITSUBISHI 22:1 L/D NIT/COL/NIT FEED SCREW1.00
MIT-S-70M-NC83N-10168MITSUBISHI70mm70MM MITSUBISHI FEED SCREW COLMONOY 83/NITRIDE1.00
MIT-S-90-4CC-M-9745-BLK-CMITSUBISHI90mm90MM MITSUBISHI MIXING FEED SCREW MANUFACTUIRED FROM ALLOY STEEL WITH COLMONOY 56 FLIGHTS, CHROME PLATED ROOTS.1.00
NA-S-120-4CC-2964-LGNATCO120mm120MM NATCO FEED SCREW WITH 3 1/4-6 THREAD1.00
NB-S-1 3/4-4CCPR-BM-14039NEWBURY1.75"1 3/4" NEWBURY FEED SCREW MANUFACTURED FROM ALLOY STEEL WITH COLMONOY 56 ON THE FLIGHTS ENCAPSULATED WITH EXTREME COATING CPR AND HIGHLY POLISHED TO A 16/32 RMS SURFACE FINISH. DESIGNED BARRIER FLIGHT AND CUSTOM CHANNEL MIXING SECTION.2.00
NB-S-2.0-C10-13363NEWBURY2.00"2" NEWBURY FEED SCREW CARBIDE ENCAPSULATED1.00
NI-S-14-4CC-16142NISSEI14mm14MM NISSEI FEED SCREW "4CC-56" MANUFACTURE FROM PRE HEAT-TREATED 4140 SERIES ALLOY STEEL WITH COL-56 HARD-SURFACING ON THE FLIGHTS ADN CHOME PLATE THE SIDES OF THE FLIGHTS AND ROOTS1.00
NI-S-19-VM9-3EG-15352NISSEI19mm19MM NISSEI FEED SCREW V-MAX-9 VERY HIGH & MODERATE CORROSION METAL1.00
NI-S-19-4CC-CDS-14302NISSEI19mm19MM NISSEI FEED SCREW CUSTOM DOWNSIZE FOR 5E INJECTION UNIT, MANUFACTURED FROM ALLOY STEEL WITH COLMONOY 56 FLIGHTS AND CHROME PLATED ROOTS.1.00
NI-S-22-VM9-5A-12189NISSEI22mm22MM NISSEI FEED SCREW MANUFACTURED FROM PLASTI-CO’S ULTRA-HIGH ABRASION RESISTANT V-MAX-9 HEAT-TREATED TOOL STEEL. FITS 5A PRE-TACT INJECTION UNITS2.00
NI-S-22-VM8-5A-12189NISSEI22mm22MM NISSEI FEED SCREW MANUFACTURED FROM PLASTI-CO V-MAX-8 SUPER HIGH ABRASION RESISTANT HEAT-TREATED TOOL STEEL. FITS 5A PRE TACT INJECTION UNITS.3.00
NI-S-26-VM9-18A-17073NISSEI26mm1.00
NI-S-26-VM9-5E/A-14049NISSEI26mm1.00
NI-S-26-VM8-5E/A-14049NISSEI26mm26MM NISSEI 5E/A FEED SCREW MANUFACTURED WITH “V-MAX-8” HIGH WEAR & MODERATE CORROSION: MANUFACTURED FROM PLASTI-CO’S V-MAX-8 TOOL STEEL OFFERING HIGH WEAR RESISTANCE, MODERATE CORROSION RESISTANCE PROPERTIES A CAST PRODUCT USING A COMBINATION OF HIGH LEVELS OF TUNGSTEN CARBIDE AS WELL AS VANADIUM CARBIDE NOT FOUND IN POWDERED METALS. THIS PRODUCT CAN OFFER IMPROVED LIFE CYCLE OVER POWDER METALS WHEN HIGH SPEEDS AND PROCESS TEMPERATURES ARE BEING USED. COMPARABLE TO HIGH VANADIUM POWDER METAL STEELS WITH THE V-MAX ENHANCEMENTS, HEAT-TREATED AND POLISHED FLIGHT SIDES AND ROOTS.2.00
NI-S-28-VM8-9A-11564NISSEI28mm28MM NISSEI FEED SCREW FITS 9A INJECTION UNIT PRE TACT CONTROL. MANUFACTURED FROM PLASTI-CO V-MAX-8 SUPER HIGH ABRASION RESISTANT HEAT-TREATED TOOL STEEL. GENERAL-PURPOSE FLIGHT DESIGN.2.00
NI-S-30-VM9-5E-7931NISSEI30mm30MM NISSEI FEED SCREW MANUFACTURED FROM PLASTI-CO V-MAX9 SUPER HIGH ABRAISON RESISTANT HEAT-TREATED TOOL STEEL. FITS 5E AND 5VE INJECTION UNITS.1.00
NI-S-32-VM9-12A-10493NISSEI32mm32MM NISSEI FEED SCREW FITS 12A PRE TACT INJECTION UNIT “V-MAX-9” VERY HIGH WEAR & MODERATE CORROSION: MANUFACTURED FROM PLASTI-CO’S V-MAX-9 TOOL STEEL OFFERING VERY HIGH WEAR, MODERATE CORROSION RESISTANCE PROPERTIES A POWDER METAL PRODUCT USING HIGH LEVELS OF VANADIUM CARBIDE COMBINED WITH MODERATE LEVELS OF CHROMIUM. COMPARABLE TO OTHER HIGH VANADIUM POWDER METAL STEEL WITH THE V-MAX ENHANCEMENTS, HEAT-TREATED AND POLISHED FLIGHT SIDES AND ROOTS.2.00
NI-S-32-VM8-9A-12601NISSEI32mm32MM NISSEI FEED SCREW GENERAL PURPOSE FLIGHT PROFILE, FITS 9A PRE TACT INJECTION UNIT. “V-MAX-8” HIGH WEAR & MODERATE CORROSION: MANUFACTURED FROM PLASTI-CO’S V-MAX-8 TOOL STEEL OFFERING HIGH WEAR RESISTANCE, MODERATE CORROSION RESISTANCE PROPERTIES A CAST PRODUCT USING A COMBINATION OF HIGH LEVELS OF TUNGSTEN CARBIDE AS WELL AS VANADIUM CARBIDE NOT FOUND IN POWDERED METALS. THIS PRODUCT CAN OFFER IMPROVED LIFE CYCLE OVER POWDER METALS WHEN HIGH SPEEDS AND PROCESS TEMPERATURES ARE BEING USED. COMPARABLE TO HIGH VANADIUM POWDER METAL STEELS WITH THE V-MAX ENHANCEMENTS, HEAT-TREATED AND POLISHED FLIGHT SIDES AND ROOTS.2.00
NI-S-32-VM8-12E/A-11100NISSEI32mm32MM NISSEI FEED SCREW FITS 12A/E INJECTION UNIT WITH TACT CONTROL. MANUFACTURED FROM PLASTI-CO V-MAX-8 SUPER HIGH ABRASION RESISTANT HEAT-TREATED TOOL STEEL. GENERAL-PURPOSE FLIGHT DESIGN.1.00
NI-S-32-VM8-18E/A-15860NISSEI32mm32MM NISSEI FEED SCREW GENERAL PURPOSE FLIGHT PROFILE, FITS 18E/A TACT INJECTION UNIT. “V-MAX-8” HIGH WEAR & MODERATE CORROSION: MANUFACTURED FROM PLASTI-CO’S V-MAX-8 TOOL STEEL OFFERING HIGH WEAR RESISTANCE, MODERATE CORROSION RESISTANCE PROPERTIES A CAST PRODUCT USING A COMBINATION OF HIGH LEVELS OF TUNGSTEN CARBIDE AS WELL AS VANADIUM CARBIDE NOT FOUND IN POWDERED METALS. THIS PRODUCT CAN OFFER IMPROVED LIFE CYCLE OVER POWDER METALS WHEN HIGH SPEEDS AND PROCESS TEMPERATURES ARE BEING USED. COMPARABLE TO HIGH VANADIUM POWDER METAL STEELS WITH THE V-MAX ENHANCEMENTS, HEAT-TREATED AND POLISHED FLIGHT SIDES AND ROOTS.1.00
NI-S-36-VM9-18A-15055NISSEI36mm36MM NISSEI FEED SCREW MANUFACTURED FROM PLASTI-CO V-MAX-9 ULTRA HIGH ABRASION RESISTANT HEAT-TREATED TOOL STEEL. GENERAL-PURPOSE FLIGHT DESIGN. FITS 18A INJECTION UNITS WITH PRE TACT CONTROL.2.00
NI-S-36-VM8-9A-8300NISSEI36mm36MM NISSEI FEED SCREW GENERAL PROPOSE FLIGHT DESIGN FITS 9A OLDER PRE TACT INJECTION UNITS. “V-MAX-8” HIGH WEAR & MODERATE CORROSION: MANUFACTURED FROM PLASTI-CO’S V-MAX-8 TOOL STEEL OFFERING HIGH WEAR RESISTANCE, MODERATE CORROSION RESISTANCE PROPERTIES A CAST PRODUCT USING A COMBINATION OF HIGH LEVELS OF TUNGSTEN CARBIDE AS WELL AS VANADIUM CARBIDE NOT FOUND IN POWDERED METALS. THIS PRODUCT CAN OFFER IMPROVED LIFE CYCLE OVER POWDER METALS WHEN HIGH SPEEDS AND PROCESS TEMPERATURES ARE BEING USED. COMPARABLE TO HIGH VANADIUM POWDER METAL STEELS WITH THE V-MAX ENHANCEMENTS, HEAT-TREATED AND POLISHED FLIGHT SIDES AND ROOTS.1.00
NI-S-40-VM9-18A-4628NISSEI40mm40MM NISSEI FEED SCREW FITS 18A PRE TACT INJECTION UNITS “V-MAX-9” VERY HIGH WEAR & MODERATE CORROSION: MANUFACTURED FROM PLASTI-CO’S V-MAX-9 TOOL STEEL OFFERING VERY HIGH WEAR, MODERATE CORROSION RESISTANCE PROPERTIES A POWDER METAL PRODUCT USING HIGH LEVELS OF VANADIUM CARBIDE COMBINED WITH MODERATE LEVELS OF CHROMIUM. COMPARABLE TO OTHER HIGH VANADIUM POWDER METAL STEEL WITH THE V-MAX ENHANCEMENTS, HEAT-TREATED AND POLISHED FLIGHT SIDES AND ROOTS.1.00
NI-S-40-VM9-12A-10186NISSEI40mm40MM NISSEI 12A INJECTION UNIT SCREW, V-MAX9 TOOL STEEL2.00
NI-S-40-VM8HC-25A-16774NISSEI40mmMANUFACTURE FROM PSB-27 TOOL STEEL (D2 BASE) | PLASTI-CO TO PROVIDE RAW STEEL | D-STEEL IS NOT TO CUT DRIVE END & THREADS AS TO PRINT #16774-TSB (MUST HAVE TRUE TURNED FACE ON DRIVE END) | PLASTI-CO TO CUT DRIVE & THREADS PER PRINT #16774 & TAKE TO HEAT TREAT | HEAT TREAT TO 52 - 54 ROCKWELL WITH DRAWN DOWN SHANK TO 34-44 ROCKWELL | D-STEEL TO COMPLETE FINAL GRIND AND POLISH AFTER HEAT TREAT | P21.00
NI-S-40-VM8-25A/E-11925NISSEI40mm40MM NISSEI FEED SCREW FITS 25A/E INJECTION UNIT WITH TACT CONTROL. MANUFACTURED FROM PLASTI-CO V-MAX-8 SUPER HIGH ABRASION RESISTANT HEAT-TREATED TOOL STEEL. GENERAL-PURPOSE FLIGHT DESIGN.3.00
NI-S-40-4CC-25E/A-11925-BLKNISSEI40mm40MM NISSEI FEED SCREW, FITS 25A/E INJECTION UNITS WITH TACT CONTROL, MANUFACTURED FROM ALLOY STEEL WITH COLMONOY 56 FLIGHTS AND CHROME PLATED ROOTS.1.00
NI-S-45M-VM9-36E/A-11114NISSEI45mm45MM NISSEI (36E/A) TACT FEED SCREW, V-MAX-9 ULTRA ABRASION- MANUFACTURED FROM PLASTI-CO’S ULTRA-HIGH ABRASION RESISTANT V-MAX-9 HEAT-TREATED TOOL STEEL.1.00
NI-S-45-VM9-36A-8291NISSEI45mm45MM NISSEI (36A) PRE TACT FEED SCREW MANUFACTURD FROM V-MAX-91.00
NI-S-45-VM9-25E/A-11113NISSEI45mm45MM NISSEI FEED SCREW FITS 25A/E INJECTION UNIT WITH TACT CONTROL. MANUFACTURED FROM PLASTI-CO V-MAX-9 SUPER HIGH ABRASION RESISTANT HEAT-TREATED TOOL STEEL. GENERAL-PURPOSE FLIGHT DESIGN.1.00
NI-S-45M-C10-18A-14017NISSEI45mm45MM NISSEI CARBIDE FEEDSCREW WITH .010" PER SIDE CARBIDE COATING AND 16/32 RMS SURFACE FINISH. 18A INJECTION UNITS FOR TACT CONTROL MACHINES.1.00
NI-S-45-VM8-50E/A-15864NISSEI45mm45MM NISSEI FEED SCREW GENERAL PURPOSE FLIGHT PROFILE, FITS 50E/A TACT INJECTION UNIT. “V-MAX-8” HIGH WEAR & MODERATE CORROSION: MANUFACTURED FROM PLASTI-CO’S V-MAX-8 TOOL STEEL OFFERING HIGH WEAR RESISTANCE, MODERATE CORROSION RESISTANCE PROPERTIES A CAST PRODUCT USING A COMBINATION OF HIGH LEVELS OF TUNGSTEN CARBIDE AS WELL AS VANADIUM CARBIDE NOT FOUND IN POWDERED METALS. THIS PRODUCT CAN OFFER IMPROVED LIFE CYCLE OVER POWDER METALS WHEN HIGH SPEEDS AND PROCESS TEMPERATURES ARE BEING USED. COMPARABLE TO HIGH VANADIUM POWDER METAL STEELS WITH THE V-MAX ENHANCEMENTS, HEAT-TREATED AND POLISHED FLIGHT SIDES AND ROOTS.3.00
NI-S-45-VM8-25A/E-11113NISSEI45mm45MM NISSEI FEED SCREW FITS 25A/E INJECTION UNIT WITH TACT CONTROL. MANUFACTURED FROM PLASTI-CO V-MAX-8 SUPER HIGH ABRASION RESISTANT HEAT-TREATED TOOL STEEL. GENERAL-PURPOSE FLIGHT DESIGN.2.00
NI-S-45-NCN-7040-BLKNISSEI45mm1.00
NI-S-45-36A-M-CPR-CU-13856-NSYNISSEI45mm45MM NISSEI FEED SCREW ++++++++++PREPPED FOR CPR COATING +++++++++1.00
NI-S-45-VM9-18A/E-13368NISSEI45mm45MM NISSEI FEED SCREW FITS 18A/E INJECTION UNIT WITH TACT CONTROL. MANUFACTURED FROM PLASTI-CO V-MAX-9 SUPER HIGH ABRASION RESISTANT HEAT-TREATED TOOL STEEL. GENERAL-PURPOSE FLIGHT DESIGN.2.00
NI-S-50-VM9-50E/A-11277NISSEI50mm50MM NISSEI FEED SCREW FITS 50E/A INJECTION UNITS. MANUFACTURED FROM PLASTI-CO’S V-MAX-9 TOOL STEEL OFFERING VERY HIGH WEAR, MODERATE CORROSION RESISTANCE PROPERTIES A POWDER METAL PRODUCT USING HIGH LEVELS OF VANADIUM CARBIDE COMBINED WITH MODERATE LEVELS OF CHROMIUM. COMPARABLE TO OTHER HIGH VANADIUM POWDER METAL STEEL WITH THE V-MAX ENHANCEMENTS, HEAT-TREATED AND POLISHED FLIGHT SIDES AND ROOTS.2.00
NI-S-50M-VM8-50E-11277NISSEI50mm50MM NISSEI (50E) FEED SCREW V-MAX8 TOOL STEEL1.00
NI-S-50-VM8-25A-12135NISSEI50mm50MM NISSEI FEED SCREW GENERAL-PURPOSE FLIGHT DESIGN, FITS 25A OLDER PRE TACT INJECTION UNITS MANUFACTURED FROM “V-MAX-8” HIGH WEAR & MODERATE CORROSION: MANUFACTURED FROM PLASTI-CO’S V-MAX-8 TOOL STEEL OFFERING HIGH WEAR RESISTANCE, MODERATE CORROSION RESISTANCE PROPERTIES A CAST PRODUCT USING A COMBINATION OF HIGH LEVELS OF TUNGSTEN CARBIDE AS WELL AS VANADIUM CARBIDE NOT FOUND IN POWDERED METALS. THIS PRODUCT CAN OFFER IMPROVED LIFE CYCLE OVER POWDER METALS WHEN HIGH SPEEDS AND PROCESS TEMPERATURES ARE BEING USED. COMPARABLE TO HIGH VANADIUM POWDER METAL STEELS WITH THE V-MAX ENHANCEMENTS, HEAT-TREATED AND POLISHED FLIGHT SIDES AND ROOTS.1.00
NI-S-50-VM8-25E/A-15739NISSEI50mm50MM NISSEI FEED SCREW, GENERAL-PURPOSE DESIGN FITS 25E/A INJECTION UNITS “V-MAX-8” HIGH WEAR & MODERATE CORROSION: MANUFACTURED FROM PLASTI-CO’S V-MAX-8 TOOL STEEL OFFERING HIGH WEAR RESISTANCE, MODERATE CORROSION RESISTANCE PROPERTIES A CAST PRODUCT USING A COMBINATION OF HIGH LEVELS OF TUNGSTEN CARBIDE AS WELL AS VANADIUM CARBIDE NOT FOUND IN POWDERED METALS. THIS PRODUCT CAN OFFER IMPROVED LIFE CYCLE OVER POWDER METALS WHEN HIGH SPEEDS AND PROCESS TEMPERATURES ARE BEING USED. COMPARABLE TO HIGH VANADIUM POWDER METAL STEELS WITH THE V-MAX ENHANCEMENTS, HEAT-TREATED AND POLISHED FLIGHT SIDES AND ROOTS.3.00
NI-S-50-4CC-LOW-71E/A-13341NISSEI50mm50MM NISSEI FEED SCREW CUSTOM FLIGHT PROFILE LOW SHEAR / LOW VOLUME MANUFACTURED FROM ALLOY STEEL WITH COLMONOY 56 FLIGHTS AND CHROME PLATED ROOTS. FITS 71E/A INJECTION UNITS. NOTE SCREW HAS CUSTOM REGUSTER OD OF 1.680" DIA.1.00
NI-S-50M-4CC-50E-11277-BLKNISSEI50mm50MM NISSEI (50E) FEED SCREW COLMONOY/CHROME1.00
NI-S-50-4CC-M-16865-BLKNISSEI50mm2.00
NI-S-56-VM8-36E/A-9040NISSEI56mmNISSEI 56MM FEED SCREW, FITS 36E/A INJECTION UNIT TACT CONTROLLER. “V-MAX-8” HIGH WEAR & MODERATE CORROSION: MANUFACTURED FROM PLASTI-CO’S V-MAX-8 TOOL STEEL OFFERING HIGH WEAR RESISTANCE, MODERATE CORROSION RESISTANCE PROPERTIES A CAST PRODUCT USING A COMBINATION OF HIGH LEVELS OF TUNGSTEN CARBIDE AS WELL AS VANADIUM CARBIDE NOT FOUND IN POWDERED METALS. THIS PRODUCT CAN OFFER IMPROVED LIFE CYCLE OVER POWDER METALS WHEN HIGH SPEEDS AND PROCESS TEMPERATURES ARE BEING USED. COMPARABLE TO HIGH VANADIUM POWDER METAL STEELS WITH THE V-MAX ENHANCEMENTS, HEAT-TREATED AND POLISHED FLIGHT SIDES AND ROOTS.1.00
NI-S-56-VM8-36A-9306NISSEI56mm56MM NISSEI FEED SCREW GENERAL-PURPOSE FLIGHT DESIGN FITS 36A PRE TACT INJECTION UNITS. “V-MAX-8” HIGH WEAR & MODERATE CORROSION: MANUFACTURED FROM PLASTI-CO’S V-MAX-8 TOOL STEEL OFFERING HIGH WEAR RESISTANCE, MODERATE CORROSION RESISTANCE PROPERTIES A CAST PRODUCT USING A COMBINATION OF HIGH LEVELS OF TUNGSTEN CARBIDE AS WELL AS VANADIUM CARBIDE NOT FOUND IN POWDERED METALS. THIS PRODUCT CAN OFFER IMPROVED LIFE CYCLE OVER POWDER METALS WHEN HIGH SPEEDS AND PROCESS TEMPERATURES ARE BEING USED. COMPARABLE TO HIGH VANADIUM POWDER METAL STEELS WITH THE V-MAX ENHANCEMENTS, HEAT-TREATED AND POLISHED FLIGHT SIDES AND ROOTS.2.00
NI-S-56-VM8-71E/A-10863NISSEI56mm56MM NISSEI (71E/A) FEED SCREW V-MAX-8 HIGH ABRASION- MANUFACTURED FROM PLASTI-CO'S SUPER HIGH ABRASION RESISTANT V-MAX-8 HEAT-TREATED TOOL STEEL.1.00
NI-S-56-VM8-50A-5211NISSEI56mm56MM NISSEI FEED SCREW FITS 50A PRE-TACT INJECTION UNIT, “V-MAX-8” HIGH WEAR & MODERATE CORROSION: MANUFACTURED FROM PLASTI-CO’S V-MAX-8 TOOL STEEL OFFERING HIGH WEAR RESISTANCE, MODERATE CORROSION RESISTANCE PROPERTIES A CAST PRODUCT USING A COMBINATION OF HIGH LEVELS OF TUNGSTEN CARBIDE AS WELL AS VANADIUM CARBIDE NOT FOUND IN POWDERED METALS. THIS PRODUCT CAN OFFER IMPROVED LIFE CYCLE OVER POWDER METALS WHEN HIGH SPEEDS AND PROCESS TEMPERATURES ARE BEING USED. COMPARABLE TO HIGH VANADIUM POWDER METAL STEELS WITH THE V-MAX ENHANCEMENTS, HEAT-TREATED AND POLISHED FLIGHT SIDES AND ROOTS.1.00
NI-S-56-4CC-B-M-100LE-14625NISSEI56mm56MM NISSEI FEED SCREW BARRIER FLIGHT WITH P-3000 MIXING SECTION, MANUFACTURED FROM ALLOY STEEL WITH COLMONOY 56 HARD SURFACING ON THE MAIN FLIGHT AND CHROME PLATED. FITS 100LE INJECTION UNIT.1.00
NI-S-56-NCN-36A-LOW-13433NISSEI56mm56MM NISSEI FEED SCREW GENERAL PURPOSE FLIGHT DESIGN WITH A 2.5:1 COMPRESSION RATIO, FITS 36A OLDER PRE TACT INJECTION UNITS. “NCN-56” NITRALLOY 135M / COLMONOY 56 / NITRIDE: MANUFACTURED FROM PRE HEAT-TREATED NITRALLOY 135M ALLOY STEEL WITH COLMONOY NO. 56 HARD SURFACING ON THE FLIGHT, NITRIDE SURFACE HARDENED FLIGHT SIDES & ROOTS.1.00
NI-S-56M-NCN-50A-9852-BLKNISSEI56mm56MM NISSEI (50A) FEED SCREW NIT/COL-56/NITRIDE1.00
NI-S-56-VM8-50A-16929NISSEI56mm1.00
NI-S-56-VM8-71A-10612NISSEI56mm56MM NISSEI FEED SCREW, FITS 71A INJECTION UNIT PRE TACT CONTROLLER. “V-MAX-8” HIGH WEAR & MODERATE CORROSION: MANUFACTURED FROM PLASTI-CO’S V-MAX-8 TOOL STEEL OFFERING HIGH WEAR RESISTANCE, MODERATE CORROSION RESISTANCE PROPERTIES A CAST PRODUCT USING A COMBINATION OF HIGH LEVELS OF TUNGSTEN CARBIDE AS WELL AS VANADIUM CARBIDE NOT FOUND IN POWDERED METALS. THIS PRODUCT CAN OFFER IMPROVED LIFE CYCLE OVER POWDER METALS WHEN HIGH SPEEDS AND PROCESS TEMPERATURES ARE BEING USED. COMPARABLE TO HIGH VANADIUM POWDER METAL STEELS WITH THE V-MAX ENHANCEMENTS, HEAT-TREATED AND POLISHED FLIGHT SIDES AND ROOTS.2.00
NI-S-63-VM8-50A-15876NISSEI63mm63MM NISSEI FEED SCREW - FITS 50A PRE TACT INJECTION UNIT MANUFACTURED FROM PLASTI-CO'S SUPER HIGH ABRASION RESISTANT V-MAX-8 HEAT-TREATED TOOL STEEL1.00
NI-S-63-VM8-50E/A-14557NISSEI63mm63MM NISSEI FEED SCREW GENERAL-PURPOSE FLIGHT DESIGN FITS 50E/A TACT INJECTION UNITS. “V-MAX-8” HIGH WEAR & MODERATE CORROSION: MANUFACTURED FROM PLASTI-CO’S V-MAX-8 TOOL STEEL OFFERING HIGH WEAR RESISTANCE, MODERATE CORROSION RESISTANCE PROPERTIES A CAST PRODUCT USING A COMBINATION OF HIGH LEVELS OF TUNGSTEN CARBIDE AS WELL AS VANADIUM CARBIDE NOT FOUND IN POWDERED METALS. THIS PRODUCT CAN OFFER IMPROVED LIFE CYCLE OVER POWDER METALS WHEN HIGH SPEEDS AND PROCESS TEMPERATURES ARE BEING USED. COMPARABLE TO HIGH VANADIUM POWDER METAL STEELS WITH THE V-MAX ENHANCEMENTS, HEAT-TREATED AND POLISHED FLIGHT SIDES AND ROOTS.1.00
NI-S-63-4CC-C-100LE-PVC-16337NISSEI63mmMANUFACTURE FROM PART # NI-S-63-4CC-100LE-PVC-16337 AND SEND TO HAVE CERMAIC COATING TECH 17 AS TO PRINT 163371.00
NI-S-63M-4CC-M-100A-14487NISSEI63mm63MM NISSEI FOR A 100A INJECTION UNIT, P-3000 STYLE MIXING FEED SCREW, COLMONOY #56 ON FLIGHTS & CHROME PLATTED ROOTS1.00
NI-S-63-TS-NCN-100A-13295NISSEI63mm63MM NISSEI FEED SCREW CUSTOM THERMOSET DESIGN MANUFACTURED FROM NITRALLOY STEEL WITH COLMONOY 56 FLIGHTS AND NITRIDE ROOTS. FITS 100A INJECTION UNIT.2.00
NI-S-63-4CC-50A-CUST-13967NISSEI63mm63MM NISSEI FEED SCREW FITS 50A PRE TACT INJECTION UNIT MANUFACTURED FROM ALLOY STEEL WITH COLMONOY 56 FLIGHTS AND CHORME PLATED ROOTS. HIGHLY CUSTOM LOW COMPRESSION DESGIN FOR PET FOOD PROCESSGING WITH CUSTOM SCREW TIP THREAD.1.00
NI-S-64-4CC-B-15035NISSEI64mm64MM NISSEI BLOW MOLDING FEED SCREW SPECIAL BARRIER COLMONOY-56/CHROME3.00
NI-S-71-VM8-71E/A-10228NISSEI71mmNISSEI 71MM FEED SCREW 71 E/A TACT MANUFACTURED FROM PLASTI-CO'S SUPER HIGH ABRASION RESISTANT V-MAX-8 HEAT-TREATED TOOL STEEL4.00
NI-S-80-VM8-100A-6221NISSEI80mm80MM NISSEI FEED SCREW MANUFACTURED FROM SUPER HIGH ABRASION RESISTANT V-MAX8 TOOL STEEL HEAT-TREATED. FITS 100A INJECTION UNIT.1.00
NI-S-80-VM9-160A-17044NISSEI80mm80MM NISSEI V-MAX-9 FEED SCREW: VERY HIGH WEAR & VERY GOOD CORROSION. PLASTI-CO’S V-MAX-9 TOOL STEEL. HEAT-TREATED WITH POLISHED FLIGHT SIDES AND ROOTS. FITS 160A INJECTION UNITS2.00
NI-S-80M-C10-11525-160ANISSEI80mm80MM NISSEI FEED SCREW WITH .010" PER SIDE CARBIDE COATING AND 16/32 RMS SURFACE FINISH. 160A INJECTION UNIT.1.00
NI-SC-80M-9074-1NISSEI80mm80MM NISSEI SPLIT COLLAR FOR DOWNSIZE AN1 SCREW1.00
NI-S-80-OEM-100ANISSEI80mm80MM NISSEI OEM (100A) FEED SCREW CHROMED1.00
NI-DA-80M-AN1-9074NISSEI80mm80MM NISSEI DRIVE ADAPTER FOR DOWNSIZE AN1 SCREW1.00
NI-S-C10-140A-16884-NSYNISSEI80mm80MM NISSEI (140A) FEED SCREW FOR SPRAY WELD1.00
NI-S-90-C10-9618-160NISSEI90mm90MM NISSEI (160A) SCREW CARBIDE ENCAPSULATE1.00
STW-S-1.25-24LD-83C-BM-14762STEWARD1.25"1 1/4" OD X 24:1 L/D RATIO STEWARD EXTRUDER FEED SCREW, BARRIER FLIGHT TRANSITION SECTION AND SPIRAL MADDOX MIXING SECTION, MANUFACTURED FROM ALLOY STEEL WITH COLMONOY 83 HARD-SURFACING ON THE MAIN FLIGHT AND CHROME PLATED.1.00
STW-S-1.25-30LD-4CC-BM-14786STEWARD1.25"1 1/4" OD X 30:1 L/D RATIO STEWARD EXTRUDER FEED SCREW, BARRIER FLIGHT TRANSITION SECTION AND SPIRAL MADDOX MIXING SECTION, MANUFACTURED FROM ALLOY STEEL WITH COLMONOY 56 HARD-SURFACING ON THE MAIN FLIGHT AND CHROME PLATED.3.00
STW-S-1.25-30LD-4CC-BM-14787STEWARD1.25"1 1/4" OD X 30:1 L/D RATIO STEWARD EXTRUDER FEED SCREW, BARRIER FLIGHT TRANSITION SECTION AND SPIRAL MADDOX MIXING SECTION, MANUFACTURED FROM ALLOY STEEL WITH COLMONOY 56 HARD-SURFACING ON THE MAIN FLIGHT AND CHROME PLATED.3.00
SU-S-22-PCS-888SUMITOMO22mm22MM SUMITOMO FEED SCREW TUNGSTEN/CARBIDE COATING1.00
SU-S-25-PCS-888-7396SUMITOMO25mm25MM SUMITOMO FEED SCREW CARBIDE ENDCAPSULATED1.00
SU-S-45-4CC-83-7573SUMITOMO45mm45MM SUMITOMO FEED SCREW “4CC-83” 4140 / COLMONOY NO. 83 / CHROME: MANUFACTURED FROM PRE HEAT-TREATED 4140 SERIES ALLOY STEEL WITH COLMONOY NO. 83 HARD-SURFACING ON THE FLIGHT, CHROME PLATED FLIGHT SIDES & ROOTS.1.00
TO-S-25-VM9-1.5Y-11901TOSHIBA25mm25MM TOSHIBA FEED SCREW, MANUFACTURED FROM PLASTI-CO V-MAX-9 ULTRA HIGH ABRASION RESISTANT HEAT-TREATED TOOL STEEL.1.00
TO-S-25-VM9-1.5A-15744TOSHIBA25mm25MM TOSHIBA FEED SCREW, MANUFACTURED FROM PLASTI-CO V-MAX-9 ULTRA HIGH ABRASION RESISTANT HEAT-TREATED TOOL STEEL.2.00
TO-S-28-VM9-1B-9772TOSHIBA28mm2.00
TO-S-32-VM9-3Y-7192TOSHIBA32mm32MM TOSHIBA VM9 FEED SCREW, 3Y2.00
TO-S-36-VM9-5472TOSHIBA36mm36MM TOSHIBA FEED SCREW FITS 2B INJECTION UNIT MANUFACTURED FROM PLASTI-CO V-MAX-9 SUPER HIGH ABRASION RESISTANT HEAT-TREATED TOOL STEEL1.00
TO-S-36-VM9-2B-15433TOSHIBA36mm36MM TOSHIBA V-MAX-9 FEED SCREW: VERY HIGH WEAR & VERY GOOD CORROSION. PLASTI-CO’S V-MAX-9 TOOL STEEL. HEAT-TREATED WITH POLISHED FLIGHT SIDES AND ROOTS. FITS 2B INJECTION UNITS1.00
TO-S-36M-4CC-M-13252TOSHIBA36mm36MM TOSHIBA 3A FEED SCREW WITH SPECIAL MIXER 2.3:1 COMP.1.00
TO-S-40-C10-7505-BLKTOSHIBA40mm40MM TOSHIBA (5A/4A) SCREW CARBIDE ENCAPSULATE1.00
TO-S-40-VM9-6Y/7Y-6369TOSHIBA40mm40MM TOSHIBA FEED SCREW GENERAL-PURPOSE FLIGHT DESIGN FITS 6Y & 7Y INJECTION UNITS. “V-MAX-9” VERY HIGH WEAR & MODERATE CORROSION: MANUFACTURED FROM PLASTI-CO’S V-MAX-9 TOOL STEEL OFFERING VERY HIGH WEAR, MODERATE CORROSION RESISTANCE PROPERTIES A POWDER METAL PRODUCT USING HIGH LEVELS OF VANADIUM CARBIDE COMBINED WITH MODERATE LEVELS OF CHROMIUM. COMPARABLE TO OTHER HIGH VANADIUM POWDER METAL STEEL WITH THE V-MAX ENHANCEMENTS, HEAT-TREATED AND POLISHED FLIGHT SIDES AND ROOTS.2.00
TO-S-40-VM9-3B-5875TOSHIBA40mm40MM TOSHIBA FEED SCREW GENERAL-PURPOSE FLIGHT DESIGN FITS 3B INJECTION UNITS. “V-MAX-9” VERY HIGH WEAR & MODERATE CORROSION: MANUFACTURED FROM PLASTI-CO’S V-MAX-9 TOOL STEEL OFFERING VERY HIGH WEAR, MODERATE CORROSION RESISTANCE PROPERTIES A POWDER METAL PRODUCT USING HIGH LEVELS OF VANADIUM CARBIDE COMBINED WITH MODERATE LEVELS OF CHROMIUM. COMPARABLE TO OTHER HIGH VANADIUM POWDER METAL STEEL WITH THE V-MAX ENHANCEMENTS, HEAT-TREATED AND POLISHED FLIGHT SIDES AND ROOTS.1.00
TO-S-45M-C10-8663-BLKTOSHIBA45mm45MM TOSHIBA FEED SCREW CARBIDE COATED, 4B/5B1.00
TO-S-45-VM9-6A/7A-6002TOSHIBA45mm45MM TOSHIBA FEED SCREW GENERAL-PURPOSE FLIGHT DESIGN FITS 6A & 7A INJECTION UNITS. “V-MAX-9” VERY HIGH WEAR & MODERATE CORROSION: MANUFACTURED FROM PLASTI-CO’S V-MAX-9 TOOL STEEL OFFERING VERY HIGH WEAR, MODERATE CORROSION RESISTANCE PROPERTIES A POWDER METAL PRODUCT USING HIGH LEVELS OF VANADIUM CARBIDE COMBINED WITH MODERATE LEVELS OF CHROMIUM. COMPARABLE TO OTHER HIGH VANADIUM POWDER METAL STEEL WITH THE V-MAX ENHANCEMENTS, HEAT-TREATED AND POLISHED FLIGHT SIDES AND ROOTS.3.00
TO-S-45-VM9-10Y-11490TOSHIBA45mm45MM TOSHIBA FEED SCREW GENERAL-PURPOSE FLIGHT DESIGN FITS 10Y INJECTION UNITS. “V-MAX-9” VERY HIGH WEAR & MODERATE CORROSION: MANUFACTURED FROM PLASTI-CO’S V-MAX-9 TOOL STEEL OFFERING VERY HIGH WEAR, MODERATE CORROSION RESISTANCE PROPERTIES A POWDER METAL PRODUCT USING HIGH LEVELS OF VANADIUM CARBIDE COMBINED WITH MODERATE LEVELS OF CHROMIUM. COMPARABLE TO OTHER HIGH VANADIUM POWDER METAL STEEL WITH THE V-MAX ENHANCEMENTS, HEAT-TREATED AND POLISHED FLIGHT SIDES AND ROOTS.1.00
TO-S-45-VM9-8Y-9157TOSHIBA45mm45MM TOSHIBA FEED SCREW, FITS 8Y INJECTION UNIT, “V-MAX-9” VERY HIGH WEAR & MODERATE CORROSION: MANUFACTURED FROM PLASTI-CO’S V-MAX-9 TOOL STEEL OFFERING VERY HIGH WEAR, MODERATE CORROSION RESISTANCE PROPERTIES A POWDER METAL PRODUCT USING HIGH LEVELS OF VANADIUM CARBIDE COMBINED WITH MODERATE LEVELS OF CHROMIUM. COMPARABLE TO OTHER HIGH VANADIUM POWDER METAL STEEL WITH THE V-MAX ENHANCEMENTS, HEAT-TREATED AND POLISHED FLIGHT SIDES AND ROOTS.1.00
TO-S-60-VM9HC-17/19A-15532TOSHIBA60mm60MM TOSHIBA FEED SCREW CUSTOM FLIGHT PROFILE WITH 2.6:1 COMPRESSION, FITS 17A/19A INJECTION UNITS, “V-MAX-9HC” VERY HIGH WEAR & HIGH CORROSION: MANUFACTURED FROM PLASTI-CO’S V-MAX-9HC TOOL STEEL OFFERING VERY HIGH WEAR, HIGH CORROSION RESISTANCE PROPERTIES A POWDER METAL PRODUCT USING HIGH LEVELS OF VANADIUM CARBIDE COMBINED WITH VERY HIGH LEVELS OF CHROMIUM. COMPARABLE TO OTHER HIGH VANADIUM POWDER METAL STEEL WITH THE V-MAX ENHANCEMENTS, HEAT-TREATED AND POLISHED FLIGHT SIDES AND ROOTS.1.00
TO-S-70-VM9HC-27A-15533TOSHIBA70mm70MM TOSHIBA FEED SCREW CUSTOM FLIGHT PROFILE WITH 2.6:1 COMPRESSION, FITS 27A INJECTION UNITS, “V-MAX-9HC” VERY HIGH WEAR & HIGH CORROSION: MANUFACTURED FROM PLASTI-CO’S V-MAX-9HC TOOL STEEL OFFERING VERY HIGH WEAR, HIGH CORROSION RESISTANCE PROPERTIES A POWDER METAL PRODUCT USING HIGH LEVELS OF VANADIUM CARBIDE COMBINED WITH VERY HIGH LEVELS OF CHROMIUM. COMPARABLE TO OTHER HIGH VANADIUM POWDER METAL STEEL WITH THE V-MAX ENHANCEMENTS, HEAT-TREATED AND POLISHED FLIGHT SIDES AND ROOTS.1.00
TOYO-S-28-VM9HC-15233TOYO28mm1.00
TOYO-S-28-VM9HC-13920TOYO28mm28MM TOYO FEED SCREW V-MAX-9HC ULTRA ABRASION & CORROSION- MANUFACTURED FROM PLASTI-CO’S ULTRA-HIGH ABRASION AND CORROSION RESISTANT V-MAX-9HC HEAT-TREATED TOOL STEEL.1.00
TOYO-S-28-VM8-13920TOYO28mm28MM TOYO FEED SCREW MANUFACTURED FROM PLASTI-CO'S SUPER HIGH ABRASION RESISTANT V-MAX-8 HEAT-TREATED TOOL STEEL1.00
TOYO-S-32M-H-4CC-15993-BLKTOYO32mm32MM TOYO FEED SCREW COLMONOY 56 & CHROME1.00
TOYO-S-36-VM8-13918TOYO36mm36MM TOYO FEED SCREW MANUFACTURED FROM PLASTI-CO'S SUPER HIGH ABRASION RESISTANT V-MAX-8 HEAT-TREATED TOOL STEEL1.00
TOYO-S-50-VM9TOYO50mm1.00
TOYO-S-68-PX9-SPECT-13027TOYO68mm68MM TOYO FEED SCREW MANUFACTURED FROM PX-900 TOOL STEEL HEAT-TREATED, CUSTOM FLIGHT PRIOFILE AS PER SAMPLE FOR SPECTRUM PLASTICS PRESS 98.2.00
TOYO-S-75-VM8-SI-16197TOYO75mm75MM TOYO SI-III FEED SCREW MANUFACTURED FROM PLASTI-CO’S V-MAX-8 TOOL STEEL OFFERING HIGH WEAR RESISTANCE, MODERATE CORROSION RESISTANCE PROPERTIES A CAST PRODUCT USING A COMBINATION OF HIGH LEVELS OF TUNGSTEN CARBIDE AS WELL AS VANADIUM CARBIDE NOT FOUND IN POWDERED METALS. THIS PRODUCT CAN OFFER IMPROVED LIFE CYCLE OVER POWDER METALS WHEN HIGH SPEEDS AND PROCESS TEMPERATURES ARE BEING USED. COMPARABLE TO HIGH VANADIUM POWDER METAL STEELS WITH THE V-MAX ENHANCEMENTS, HEAT-TREATED AND POLISHED FLIGHT SIDES AND ROOTS.1.00
UBE-S-112M-4CC-7342UBE112mm112MM UBE FEED SCREW 4340/COL/CHRM OEM DESIGN, # A73-00138:023-01.00
UBE-S-120-4CC-M-13340UBE120mm120MM UBE DESIGN FEED SCREW, COLMONOY 56 AND CHROME WITH BARRIER MIXER, 189-41619:031-01.00
UBE-S-120-4CC-13158CSUBE120mm120MM UBE FEED SCREW 4140/COL 56/ CHROME, FOR I139, US150-252-201-0A/11.00
UBE-KEY-120-11754UBE120mmUBE KEY FOR 120MM UBE FEEDSCREW, A73-00433-226-0/11.00
UBE-S-132-4CC-M-8049UBE132mm132MM UBE FEED SCREW OEM DESIGN 4340/COL/CHROME WITH MIXER1.00
UBE-S-90-4CCPR-14189UBE90mm90MM UBE FEED SCREW MANUFACTURED FROM ALLOY STEEL WITH COLMONOY 56 FLIGHTS AND CPR COATING, 22:1 L/D, 3.0:1 COMP1.00
UBE-S-90M-4CC-M-12191UBE90mm1.00
VD35-CC-8395VAN DORN35mm35MM VAN DORN FEED SCREW 4140/COL/CHROME G.P4.00
VD-S-40-VM9-4404VAN DORN40mm40MM VAN DORN FEED SCREW FITS 8 OZ. SHOT SIZE INJECTION UNIT. MANUFACTURED FROM PLASTI-CO V-MAX-9 SUPER HIGH ABRASION RESISTANT HEAT-TREATED TOOL STEEL. GENERAL-PURPOSE FLIGHT DESIGN.1.00
VD-S-40-VM8-4404VAN DORN40mm40MM VAN DORN FEED SCREW FITS 8 OZ. SHOT SIZE INJECTION UNIT. MANUFACTURED FROM PLASTI-CO V-MAX-8 SUPER HIGH ABRASION RESISTANT HEAT-TREATED TOOL STEEL. GENERAL-PURPOSE FLIGHT DESIGN.2.00
VD40-CN-4404VAN DORN40mm40MM VAN DORN FEED SCREW 4140/COL/NITRITED G.P1.00
VD-S-50-VM8-4405VAN DORN50mm50MM VAN DORN GP FEED SCREW MANUFACTURED FROM HIGH ABRASION V-MAX 8 HEAT-TREATED TOOL STEEL.2.00
VD-S-50-4CC-M-6326VAN DORN50mm1.00
VD-S-50-PCS-888VAN DORN50mm50MM VAN DORN PCS-888 ENCAPSULATED FEED SCREW1.00
VD50-CC-4405VAN DORN50mm50MM VAN DORN FEED SCREW 4140/COL/CHROME G.P2.00
VD50-CN-4405VAN DORN50mm50MM VAN DORN FEED SCREW 4140/COL/NITRITE G.P3.00
VD57-CC-M-6120VAN DORN57mm57MM VAN DORN FEED SCREW 4140/COL/CHROME MIXING2.00
VD57-CC-4557VAN DORN57mm57MM VAN DORN FEED SCREW 4140/COL/CHROME G.P4.00
VD57-CN-4557VAN DORN57mm57MM VAN DORN FEED SCREW 4140/COL/NITRITED G.P1.00
VD-S-65-VM8-3857VAN DORN65mm65MM VAN DORN FEED SCREW MANUFACTURED FROM PLASTI-CO’S ULTRA-HIGH ABRASION RESISTANT V-MAX-8 HEAT-TREATED TOOL STEEL.4.00
VD80-CC-7121VAN DORN80mm80MM VAN DORN FEED SCREW 4140/COL/CHROME G.P3.00
VDD-S-18-VM9-10604VAN DORN DEMAG18mm18MM VAN DORN DEMAG FEED SCREW MANUFACTURED FROM PLASTI-CO V-MAX-9 SUPER HIGH ABRASION RESISTANT HEAT-TREATED TOOL STEEL.1.00
VDD-S-45-VM9-4225VAN DORN DEMAG45mm45MM VAN DORN DEMAG FEED V-MAX-9 ULTRA HIGH ABRASION- MANUFACTURED FROM PLASTI-CO'S SUPER HIGH ABRASION RESISTANT V-MAX-9 HEAT-TREATED TOOL STEEL.2.00
VDD-S-95M-NCN-SPEC.VAN DORN DEMAG95mm95MM VAN DORN DEMAG FEED SCREW NIT/COL-56/NITRIDE SPECIAL1.00
HPM-S-1.125-VM8-14482HPM1.1251-1/8" HPM EXTRUDER SCREW MANUFACTURED FROM PLASTI-CO V-MAX-8 SUPER HIGH ABRASION RESISTANT HEAT-TREATED TOOL STEEL1.00
BS.75-24:1-CC-14940-1.750".750" OD X 24:1 L/D RATIO, EXTRUDER SCREW, MANUFACTURED FROM 17-4 PH STAINLESS STEEL WITH COLMONOY 56 & POLISH5.00
Call Now ButtonCall For Promotional Pricing